Description:
Rated Operational Voltage: | Main Circuit 208 ... 600 V AC |
Rated Control Supply Voltage (Us): | 100 ... 250 V AC |
Rated Control Circuit Voltage (Uc): | DC Operation 24 V |
Rated Frequency (f): | Main Circuit 50/60 Hz |
Control Supply 50/60 Hz | |
Rated Operational Power - In-Line Connection (Pe): | (230 V) 11 kW |
(400 V) 22 kW | |
(500 V) 30 kW | |
Rated Operational Current - In-Line Connection (Ie): | 45 A |
Service Factor Percentage: | 100% |
Overload Protection: | Build-in electronic overload protection |
Integrated Electronic Overload: | Yes |
Adjustable Rated Motor Current Ie: | 30 ... 100 % |
Starting Capacity at Maximum Rated Current Ie: | 4xIe for 10s |
Ramp Time: | During Start 1 ... 30 second [unit of time] |
During Stop 0 ... 30 second [unit of time] | |
Initial Voltage During Start: | 30 ... 70 % |
Step Down Voltage Special Ramp: | No % |
Current Limit Function: | 1.5 … 7xIe |
Switch for Inside Delta Connection: | No |
Run Signal Relay: | Yes |
By-pass Signal Relay: | Yes |
Fault Signal Relay: | Yes |
Overload Signal Relay: | Yes |
Analog Outputs: | 4…20 mA |
Signal indication completed start ramp (LED): | Green |
Signal indication ready to start/standby ON (LED): | Green |
Signal indication running R (LED): | Green |
Signal indication ramping up/down (LED): | Green |
Signal indication protection (LED): | Yellow |
Signal indication fault (LED): | Red |
Number of Starts Per Hour at 3.5*Ie for 7 sec. 50% ON Time 50% OFF Time: | 10 |
Communication: | FiledBusPlug(Optional) |
Degree of Protection: | acc. to IEC 60529, IEC 60947-1, EN 60529 Main Terminals IP00 |
Terminal Type: | Screw Terminals |
Connecting Capacity Main Circuit: | Rigid 1/2x2.5 ... 70 mm² |
Connecting Capacity Control Circuit: | Rigid 1x2.5 mm² |
Rigid 2x1.5 mm² | |
Connecting Capacity Supply Circuit: | Rigid 1x2.5 mm² |
Rigid 2x1.5 mm² | |
Tightening Torque: | Main Circuit 9 N·m |
Supply Circuit 0.5 N·m | |
Control Circuit 0.5 N·m | |
Product Main Type: | PSE45 |
ABB