Description:
Nominal Insulation Test Voltage | 500 V, 250 V DC |
Measuring Range | All Instruments, 10 k½ to 999 M½ on all ranges |
Short Circuit Current | 1.5 mA nominal |
Test Current on Load | 1 mA at min. pass values of insulation (as specified in BS7671, HD 384 and IEC 364) |
Accuracy (at 20°C) | ±3%, ±2 digits |
Continuity Range | 0,01 ½ - 99,9 ½ (0 -50 ½ on analogue scale) |
Open Circuit Voltage | 5 V ±1 V |
Short Circuit Current | 200 - 215 mA |
Terminal Accuracy | ±3% ±2 digits |
Zero Offset Adjust | 0 - 9 ½ |
Continuity Buzzer | Operates at <5 ½ Response time <20 ms |
Voltage Range | 0 to 600 V AC. (50/60 Hz) or DC. |
Voltage Accuracy | DC or AC (50/60 Hz) ±1%, ±2 digits |
Temperature Coefficient | <0.1% per °C on all ranges. |
Default Voltmeter | Beeps and flash ‘V’ on the display (all modes except off) |
Test Inhibit | If more than 50 volts is detected, testing will be inhibited. |
Operating Temperature | -10 to 60°C |
Operating Humidity | 93% R.H. at 40°C max. |
Storage Temperature | -25 to 70°C |
Test Result Storage | 1000 results |
Job Number | 255 locations |
Distribution Board no. | 99 locations |
Circuits | 99 locations |
Phases | P1, P2, P3 |
Last recorded result may be recalled to the display. All data can be downloaded to a PC using Download Manager (supplied) or Megger Powersuite Professional of Windows software | |
Communications | USB interface |
Environmental Protection | IP54 |
Fuses | Terminals 500 mA (F) 600 V, 32 x 6 mm Ceramic HBC 10 kA minimum. |
Display shows if fuse is ruptured. | |
Safety | Meets the requirements of IEC61010-1 Cat III 600 V phase to earth. |
Automatic discharge | After an insulation test the item under test will be discharged automatically. |
Any voltage present will be indicated on the display so that the discharge can be monitored. | |
Battery | 8 x 1.5 V cells IEC LR6 type (AA alkaline). |
Rechargeable NiCd or NiMH cells may be used. | |
Battery condition is constantly shown on the display as a four-section bargraph. | |
Battery Life | 5000 consecutive tests (5 seconds per test) on any test using 2Ah batteries. Weight |
All Units | 980 gms |
Dimensions | All units: 203 x 148 x 78 mm (8 x 5.7 x 3.2 inches) |
E.M.C. | In accordance with IEC61326 including amendment No.1 |