Complete Industrial Solution
Categories
Order Code: ETS96500901
Test Instruments > 96500901,714/1 + Electromechanical Torque Wrench 1-10Nm,Stahlwille
  |
Brand: Order Code: |
Description:
| Article Number | 714/ 1 |
| Measuring range [1] | 1–10 N·m |
| Range | Range | Range | mm | b mm | h mm | L | Lғ | Sғ | Weight |
| 1–10 N·m | 0,7–7,5 ft·lb | 9–90 in·lb | 9x12 | 28 | 23 | 226 | 188 | 17,5 | 370 |
| 4 measuring modes (torque, angle, torque backed up by angle, angle backed up by torque) |
| high-definition colour display with additional side-mounted indicator lamps |
| freely configurable menu structure |
| optionally: Li-ion battery No 7195-2 and charger No 7160 |
| 3 function modes: cut-out, peak hold (indicating mode with peak value) and track (indicating mode with current value) |
| micro USB interface |
| bayonet connection for battery compartment |
| QuickRelease safety lock change system for insert tools |
| data storage (= 2500 tightening jobs) |
| as many as 200 joints can be programmed in up to 25 preset sequences |
| different tolerance limits can be set for each joint |
| acoustic and visual assessment of the joint |
| rapid, accurate setting via keypad |
| the automatic keypad lock prevents inadvertent changes |
| overload protection by means of acoustic and visual signals and a fail-safe system (clockwise) |
| automatic notification of the next calibration date, either by the number of joints or the time interval |
| fully automated calibrating and adjusting using the perfectControl® calibrating and adjusting unit No 7794-2 (torque) or 7794-3 (torque and angle) |
| units of measure: N·m, ft·lb, in·lb |
| tightening torque is automatically corrected if a deviating extension is entered |
| immediately reusable after release |
| clockwise and anticlockwise tightening – it may be necessary to refit the insert tool rotated through 180° for anticlockwise tightening in the cut-out mode |
| tactile and acoustic trigger signal |
| torque and angle are simultaneously visible |
| all readings are independent of the point of application of force (with sizes 1, 2 and 4) |
| safe handling due to ergonomically designed handle (resistant to oils, grease, fuels, brake fluid and skydrol) |
| 3 certificates (torque indicating/clicking in accordance with DIN EN ISO 6789-2:2017, angle) |
| in sturdy plastic box (size 40-100 in steel box) |
| design patent, patent |
| supplied with SENSOMASTER 4 software, USB cable, 4 AAA/LR03 micro-batteries, 1.5 V. AAA, 1.2 V, micro NiMH rechargeable batteries can be used |
| display resolution, angle 0.1° |
| display deviation value, angle ±1%, ±1 digit |
| display resolution, torque = 60 N·m: 0.01 N·m; > 60 N·m: 0.1 N·m |
| display deviation value, torque ±2%, ±1 digit |
Back
