Description:
DPI 705 is a portable pressure indicator with an internal sensor and remote sensor to measure an absolute pressure range, differential pressure range, and gauge pressure ranges. It provides an accuracy of ±0.1% FS non-linearity, hysteresis, and repeatability. |
DPI 705 has a long battery life, high resolution 13mm LCD and It is designed for single-handed operation and provides many essential features required for routine maintenance and system troubleshooting. |
Intrinsically safe (I.S.) versions are available for use in hazardous areas. |
Selectable Pressure Units: psi, inHg, inH2O (4°C, 20°C and 60°F), ftH2O (4°C, 20°C and 60°F), mmHg, mHg, mbar, bar, mH2O, Pa, hPa, KPa, MPa, Kgf/cm2 and an optional user defined scale. |
0.1% full scale (FS) accuracy |
Rugged, lightweight handheld design |
Leak test, tare, max/min and filter |
Intrinsically safe version |
Optional pneumatic and hydraulic handpumps |
Pressure range 0 to 2 bar gauge. |
Accuracy 0.1% FS accuracy. |
Pressure Units psi, inHg, inH2O (4°C, 20°C and 60°F), ftH2O (4°C, 20°C and 60°F), mmHg, mHg, mbar, bar, mH2O, Pa, hPa, KPa, MPa, Kgf/cm2. |
Calibration Units mbar, bar, psi, kPa, mPa, hPa, Kgh/cm2. |
Leak test Standard 60 second leak test. |
Zero Zero pressure correction. |
Tare 0 to 100% FS zero offset capability. |
Filter 10 reading rolling average for unstable pressures. |
Alarm Adjustable high pressure alarm with visual and audible warning. |
Overpressure Safe to 2 x FS. Display flashes at 110% FS. |
Media compatibility Internal sensor: stainless steel, except positive differential non-corrosive fluid and negative differential dry gas. |
Ambient Temperature °C and °F reading of local condition ±1.5°C (±3°F). |
Display 13mm LCD with 99999 readout. |
Power Management Low battery indicator and selectable ‘auto off’. |
Battery 3 x Alkaline cells. |
Storage temperature -10°C to 50°C (15°F to 120°F). |
Safety Conformance EN61326-1, CE marked. |
Environmental IP54 (NEMA 12). |
Dimensions 190 x 90 x 36 mm. |
Weight <500 g. |