Description:
Width
|
40 mm |
Height | 130 mm |
Depth | 125 mm |
Width with alternative assembly | 122 mm |
Height with alternative assembly | 130 mm |
Depth with alternative assembly | 43 mm |
Input data
|
|
Nominal input voltage range | 3x 400 V AC ... 500 V AC |
Input voltage range | 3x 320 V AC ... 575 V AC |
2x 360 V AC ... 575 V AC | |
450 V DC ... 800 V DC | |
AC frequency range | 45 Hz ... 65 Hz |
Frequency range DC | 0 Hz |
Discharge current to PE | < 3.5 mA |
Current consumption | 3x 0.8 A (400 V AC) |
3x 0.7 A (500 V AC) | |
0.2 A (600 V DC) | |
Nominal power consumption | 268 VA |
Inrush surge current | < 15 A (typical) |
Mains buffering | > 20 ms (400 V AC) |
> 30 ms (500 V AC) | |
Choice of suitable circuit breakers | 6 A ... 16 A (AC: Characteristics B, C, D, K) |
Type of protection | Transient surge protection |
Protective circuit/component | Varistor, gas-filled surge arrester |
Output data
|
|
Nominal output voltage | 24 V DC ±1 % |
Setting range of the output voltage (USet) | 18 V DC ... 29.5 V DC (> 24 V DC, constant capacity restricted) |
Nominal output current (IN) | 5 A (-25 °C ... 60 °C, UOUT = 24 V DC) |
POWER BOOST (IBoost) | 7.5 A (-25°C ... 40°C permanent, UOUT = 24 V DC ) |
Selective Fuse Breaking (ISFB) | 30 A (12 ms) |
Derating | 60 °C ... 70 °C (2.5%/K) |
Connection in parallel | Yes, for redundancy and increased capacity |
Connection in series | yes |
Feedback resistance | max. 35 V DC |
Protection against surge voltage on the output | < 35 V DC |
Residual ripple | < 20 mVPP (with nominal values) |
Output power | 120 W |
Typical response time | < 0.06 s |
Peak switching voltages nominal load | < 20 mVPP (at nominal values, 20 MHz) |
Maximum power dissipation in no-load condition | 4 W |
Power loss nominal load max. | 14 W |